00518OT3E184T-S New WEG Electric Motor, 5HP, 1755 RPM, 184T Frame

WEG electric motor 00518OT3E184T

5HP 1755 RPM 184T frame

Output: 5 HP
Poles: 4
Frequency: 60 Hz
Torque: 14.8 lb.ft
Voltage: 208-230/460 V
Frame: 184T
RPM: 1755
Full Load Amps: 14.2-12.8/6.41 A
Efficiency (100%): 89.5
Power factor (100%): 0.81
Insulation: F
Noise: —
No load current: 6.00/3.00 A
Locked rotor current (II/In): 7.3

WEG Premium Efficiency motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal. Design ‘B’ torque and high efficiency design from E143/5T through 444/5T frames (design ‘A’ for frames 447/9T and 5010/11T). These motors are specifically designed to provide maximum ventilation and heat dissipation. ‘C’ and ‘D’ flange available.

Standard Features

Three-phase, II, VI and VI pole, 60Hz
Voltage: 208-230/460V, 200V, 460V or 575V
Open drip proof (ODP)
NEMA dimensions
NEMA Design ‘B’ (NEMA Design ‘A’ for frames 447/9T and 5010/11T)
Service factor: 1.15
Class ‘F’ insulation for all frames
Continuous Duty (S1), 104°F ambient (40ºC)
AISI 1040/5 heat treated and stress relieved carbon steel shaft for frames E143/5T to 364/5T and 444/5T and 5010/11 in two poles.
AISI 4140 heat treated and stress relieved carbon steel shaft for frames 404/5T to 5010/11T in 4 and 6 poles and 477/9T in two poles
F1 mount (also available flanged motors)
Paint: Synthetic enamel alkyd resin base
Color: RAL 5009 – Blue
NPT threaded terminal box
Stainless steel nameplate – laser etched (except roller steel frame – sticker)

Frame – Specific Features

FOR FRAME E143/5T up to 215T only

Welded steel plate frames (welded feet)
Aluminum endshields and terminal box
‘ZZ’ bearings (double shielded)
Degree of protection: IP21 FOR FRAME 254T UP TO 444/5T
Cast iron frames
Cast iron endshields and terminal box
All 3600RPM and 1800RPM motors are supplied with ball bearings as standard. Roller bearings are supplied as standard on frames 404T up to 445T, 1200RPM
Regreasable bearings positive pressure lubrication system (frame 254T and up)
Degree of protection: IP23

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

106285MF-132 New Armstrong S-Series 3 Piece Hot Water Circulator, 3/4 HP, 115/230 VAC

By Leave a Comment Jul 8 0

Armstrong S-Series, 3 Piece, Hot Water Circulator

106285MF-132 3/4HP, 115/230VAC

REPLACES:

Armstrong S57

Bell & Gossett PD37

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT? CALL US TODAY! SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

128010.00 New Leeson Electric Motor, Model C145D17FK3, 2 HP, 1750 RPM, 145TC Frame, 180 VDC

By Leave a Comment Jul 8 0

Leeson electric motor Catalog 128010.00

Model C145D17FK3

2HP 1750 RPM 145TC Frame 180VDC

RPM 1750 HP 2 Service Factory 1.0
KW Form Factor 1.4 Amps 9.5
KW2 Form Factor 2 FLA2
Volts 180 Frame 145TC

Max Amb 40 Duty CONT Type DF
Insulation Class H Enclosure TEFC Bearing OPE 6203
Protection NOT Protector Bearing PE 6205
EFF 78.8% Torque 72 LB-IN
UL Y CSA Y CE N
Shipping Weight 86 LB Lubrication POLYREX EM Carton Label Leeson Gen Purpose

Mounting C-Face Rigid Rotation RECONN Winding D6322
Group 1 B Shaft Diag. 7/8 IN

*THIS MOTOR WILL MOUNT AS A NEMA 143TC, AND 145TC.

*REMOVABLE BASE.

*REPLACES: Magnetek Century motor #W200

MADE IN THE USA!
*Brush holder design provides easy access to brushes

Mechanical/ Electrical Features:

*Large oversized brushes assure long brush life

*Removable bolt-on base

*NEMA C face designs

*115 or 230 volt input power ratings –

*Capable of dynamic braking

*PWM or SCR type controller rated

*High starting torque

*Permanently lubricated sealed bearings

*High starting torque

*Higher HP and speed achievable using PWM type DC controls

*UL and CSA Listed

*Meets NEMA MG1 standards

*Dynamically balanced armatures

*30:1 constant torque operation

*DC Controls available

*CLICK HERE FOR AN IMMEDIATE QUOTE

*Please include your daytime contact information, and any details such as motor 
nameplate information, and a brief description of the application of the motor.

*Most orders ship same day from stocking locations throughout the USA.

131534.00 New Leeson Electric Motor, Model C184C17DB19A 3HP, 1740 RPM, 184T Frame

By Leave a Comment Jul 28 0

Leeson electric motor catalog 131534.00

Model C184C17DB19A

3HP, 1740 RPM, 184T Frame

Volts 115 Volts 230 Volts
FL Amps 33.8 FL Amps 16.9 FL Amps
SF Amps 37.8 SF Amps 18.9 SF Amps

RPM 1800 Hertz 60
HP 3 Duty CONTINUOUS Type CD
KW 2.24 SF 1.15 Phase 1
Frame 184T Design L KVA Code J
Ambient 40 Protection NOT Therm.Prot.
Insulation Class F Eff(75%) PF 76
Eff(100%) 75.5 CSA Y Bearing OPE 6205
UL Y CE N Bearing PE 6206
CC Number Inverter Type Speed Range NONE
LOad Type

Motor Wt. 78 LB Enclosure DP Lubrication POLYREX EM
Nameplate 081285 Mounting RIGID Rotation SELECTIVE CCW

FEATURES:

Capacitor Start, Capacitor Start – Capacitor Run or Split Phase designs (As indicated)
High Start Torque
Open Drip Proof Enclosure
Reversible
Rigid Base
60HZ
Heavy Gauge Steel Frame Construction
Continuous Duty
UL Recognized & CSA Certified

REPLACEMENT BRANDS INCLUDE:

TOSHIBA ELECTRIC – BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY

ABB – DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS – Severe duty motors – EXPLOSION PROOF

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS – DESIGN D – OIL WELL PUMP MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR 
MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT? CALL US TODAY! SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

131622.00 New Leeson Electric Motor, Model P184K17DB33A, 5 HP, 1740 RPM, 184T Frame

By Leave a Comment Jul 26 0

Leeson electric motor 131622.00

Model P184K17DB33A

5HP 1740 RPM 184T frame

Nameplate Specifications

Output HP:	5 Hp	Output KW:	3.7 kW
Frequency:	60 Hz	Voltage:	208-230 V
Current:	23.0-21.0 A	Speed:	1740 rpm
Service Factor:	1.15	Phase:	1
Efficiency:	83 %	Power Factor:	94
Duty:	Continuous	Insulation Class:	F
Design Code:	L	KVA Code:	H
Frame:	184T	Enclosure:	Drip Proof
Thermal Protection:	Manual	Ambient Temperature:	40 °C
Drive End Bearing Size:	6206	Opp Drive End Bearing Size:	6205
UL:	Recognized	CSA:	Y
CE:	N	IP Code:	22
Number of Speeds:	1

Technical Specifications

Electrical Type:	Capacitor Start Capacitor Run	Starting Method:	Across The Line
Poles:	4	Rotation:	Selective Counterclockwise
Resistance Main:	.48 Ohms	Mounting:	Rigid Base
Motor Orientation:	Horizontal	Drive End Bearing:	Ball
Opp Drive End Bearing:	Ball	Frame Material:	Rolled Steel
Shaft Type:	T	Overall Length:	14.69 in
Frame Length:	10.50 in	Shaft Diameter:	1.125 in
Shaft Extension:	2.75 in	Assembly/Box Mounting:	F1 ONLY

Winding K8450 Carton Label Leeson Gen Purpose

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

140681.00 New Leeson Electric Motor, Model C215K34DB1B, 10 HP, 3515 RPM, 215T Frame

By Leave a Comment Jul 8 0

Leeson electric motor catalog 140681.00

Model C215K34DB1B

10HP, 3515 RPM, 215T Frame

Volts 208-230 Volts Volts
FL Amps 41.5-37 FL Amps FL Amps
SF Amps 49-43 SF Amps SF Amps

RPM 3600 Hertz 60
HP 10 Duty CONTINUOUS Type KD
KW 7.50 SF 1.15 Phase 1
Frame 215T Design NO DESIGN CODE KVA Code H
Ambient 40 Protection NOT Therm.Prot.
Insulation Class F Eff(75%) PF 98.5
Eff(100%) 88.5 CSA Y Bearing OPE 206
UL Y-(LEESON UL REC) CE N Bearing PE 307
CC Number EXEMPT Inverter Type Speed Range NONE
LOad Type

Motor Wt. 126 LB Enclosure DP Lubrication VERIFY
Nameplate Mounting RIGID Rotation SELECTIVE CCW
Shaft Diam. 1 3/8 IN

FEATURES:

Capacitor Start, Capacitor Start – Capacitor Run or Split Phase designs (As indicated)
High Start Torque
Open Drip Proof Enclosure
Reversible
Rigid Base
60HZ
Heavy Gauge Steel Frame Construction
Continuous Duty
UL Recognized & CSA Certified

OTHER APPLICATIONS MAY INCLUDE:

BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

TOSHIBA ELECTRIC – BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY

ABB – DEMAG HOIST & CRANE – GENTEQ

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF 
YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

171623.60 Leeson Electric Motor, Model C184T17FB1 3HP, 1800 RPM, 182T Frame

By Leave a Comment Jul 29 0

Leeson electric motor Cat. 171623.60

Model C184T17FB1

**PLEASE CALL FOR AVAILABILITY

Volts 208-230 Volts 460 Volts 190/380
FL Amps 8.3-7.8 FL Amps 3.9 FL Amps 6.6/3.3
SF Amps 10-9.4 SF Amps 4.7 SF Amps

RPM 1800 Hertz 60/50
HP 3 Duty CONTINUOUS Type TF
KW 2.24 SF 1.25 Phase 3
Frame 182T Design B KVA Code J
Ambient 40 Protection NOT Therm.Prot.
Insulation Class F Eff(75%) PF 79.5
Eff(100%) 89.5 CSA Y Bearing OPE NONE
UL Y-(LEESON UL REC) CE Y Bearing PE NONE
CC Number CC005A Inverter Type Speed Range NONE
LOad Type

Motor Wt. 112 LB Enclosure TEFC Lubrication VERIFY
Nameplate 92970 Mounting RIGID Rotation REV

Full cast iron construction

Inverter rated insulation system

Epoxy painted

Inpro shaft seal

Internal corrosion protection

IP 55 enclosure protection

Thermostat protected

3-year warranty

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC

RED BAND ELECTRIC MOTORS – SEVERE DUTY MOTORS – EXPLOSION PROOF MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS

WESTINGHOUSE MOTORS – DESIGN D – OIL WELL PUMP MOTORS– ASEA MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION 
FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

199094.00 New Leeson Electric Motor, 5HP, 3450 RPM, 145JP Frame

By Leave a Comment Jul 28 0

Leeson electric motor Catalog 199094.00

Updated to new number B199094.00

5HP, 3450 RPM, 145JP Frame

Volts 230 Volts 460 Volts 190/380
FL Amps 12 FL Amps 6 FL Amps 8.6/4.3
SF Amps 13.2 SF Amps 6.6 SF Amps 9.6/4.8

RPM 3600 Hertz 60/50
HP 5 Duty CONTINUOUS Type TF
KW 3.7 SF 1.15 Phase 3
Frame 184JP Design B KVA Code J
Ambient 40 Protection NOT Therm.Prot.
Insulation Class F Eff(75%) PF 89
Eff(100%) 88.5 CSA Y Bearing OPE 6205
UL Y-(LEESON UL REC) CE Y Bearing PE 6206
CC Number CC005A Inverter Type Speed Range NONE
LOad Type

Motor Wt. 100 Lbs Enclosure TEFC Lubrication VERIFY
Nameplate 93405-L-N-ABDFH-B-D Mounting RIGID Rotation REV

REPLACEMENT FOR Leeson electric motor Cat. G151740.60 Model C184T34FK35AA

Totally enclosed fan cooled construction for maximum life in dirty or severe environments. Over-sized, locked bearing on shaft end limits axial shaft movement.

Drip covers are available as accessory kits for 143-5JM and 182-4JM motors—see letter designations in the table for the correct kit. Some 182-4JM frame motors have enclosed end-shields as standard with frame vents meeting the 12° drip-proof requirement. No drip cover is needed, or shown in the table, for these motors

Over-sized locked bearing on shaft end limits axial shaft movement

Drip cover kits available

High efficiency copper winding’s

UL and CSA recognized designs

CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

C382B New Marathon Electric Motor, Model 182TTFW16030, 3 HP, 1770 RPM, 182TC Frame

By Leave a Comment Jul 21 0

C382B New Marathon Electric Motor, Model 182TTFW16030,

3 HP, 1770 RPM, 182TC Frame

Mechanically locked on shaft end
Class F insulation
Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower
CR200 corona resistant magnet wire
Bolt-on, removable rigid base, for footless mounting option
Suitable for horizontal and vertical mounting
Motor will not accept a brake kit

General Specifications

UPC:	722856015907	Weight:	76.00 LB
Packaged Length:	17.94 IN	Packaged Width:	13.06 IN
Packaged Height:	12.88 IN

Nameplate Specifications

Output HP:	3 Hp	Output KW:	2.2 kW
Frequency:	60 Hz	Voltage:	230/460 V
Current:	7.8/3.9 A	Speed:	1770 rpm
Service Factor:	1.15	Phase:	3
Efficiency:	89.5 %	Power Factor:	80.5
Duty:	Continuous	Insulation Class:	F
Design Code:	B	KVA Code:	K
Frame:	182TC	Enclosure:	Totally Enclosed Fan Cooled
Thermal Protection:	No Protection	Ambient Temperature:	40 °C
Drive End Bearing Size:	6206	Opp Drive End Bearing Size:	6205
UL:	Recognized	CSA:	Y
CE:	Y	IP Code:	43
Number of Speeds:	1

Technical Specifications

Electrical Type:	Squirrel Cage Induction Run	Starting Method:	Across The Line
Poles:	4	Rotation:	Reversible
Resistance Main:	6.08 Ohms	Mounting:	Bolt-on Base
Motor Orientation:	Horizontal	Drive End Bearing:	Ball
Opp Drive End Bearing:	Ball	Frame Material:	Rolled Steel
Shaft Type:	T	Overall Length:	14.47 in
Frame Length:	9.00 in	Shaft Diameter:	1.125 in
Shaft Extension:	2.88 in	Assembly/Box Mounting:	F1/F2 Capable

C382B New Marathon Electric Motor, Model 182TTFW16030, 3 HP, 1800 RPM, 182TCFrame

By Leave a Comment Jul 21 0

Marathon electric motor catalog C382B

Model 182TTFW16030

3HP, 1800 RPM, 182TC Frame

60 Hertz
HP	3	Voltage	208-230/460
kW	2.24	FL Amps	8.6-7.8/3.9
RPM	1800
FL Eff	89.5 %	SF	1.15

50 Hertz
HP	2	Voltage	190/380
kW	1.49	FL Amps	9.5/4.75
RPM	1500
FL Eff	87.2 %	SF	1.15

Phase	3	Insulation Class	F
Frame	182TC	Duty	CONTINUOUS
Enclosure	TEFC	Ambient	40
Mounting	C-Face – Removable Base	NEMA Design	B
Orientation	HORIZONTAL	Starting Type	ACROSS THE LINE
Assembly	F1 (F2 Modification Available)	KVA Code	K
Drive End Bearing	BALL	IP Code	43
Opposite End Bearing	BALL
Drive End Bearing Size	6206
Opposite End Bearing Size	6205
Weight	80 LB lbs
CE	Y	CSA	Y
UL	Recognized Construction

Features:

Ball bearings, mechanically locked on shaft end (excludes 5K models)
1.15 Service Factor (except as noted)
Class F insulation (except as noted)
Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted)
56-145T frame motors accept brake kits, see accessory kits
UL Recognized and CSA Certified
Two year warranty on EPAct and NEMA Premium efficient motors

Additional features for “Four-In-One” motors only:

CR200 Corona resistant magnet wire
Bolt-on, removable rigid base
Suitable for horizontal and vertical mounting
Will accept drip cover kits

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

C384B New Marathon Electric Motor, Model 213TTFW16078, 3 HP, 1175 RPM, 213TCV Frame

By Leave a Comment Jul 21 0

Marathon electric motor catalog C384B

Model 213TTFW16078

3HP, 1175 RPM, 213TCV Frame-OBSOLETE, PLEASE CALL FOR AN UP-TO-DATE REPLACEMENT OPTION.

Meets or exceeds NEMA Premium® efficiencies
Ball bearings, mechanically locked on shaft end
Class F insulation
Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower
CR200 corona resistant magnet wire
Bolt-on, removable rigid base, for footless mounting option
Suitable for horizontal and vertical mounting
Motor will not accept a brake kit

General Specifications

UPC:	722856066602	Weight:	122.00 LB
Packaged Length:	22.19 IN	Packaged Width:	16.5 IN
Packaged Height:	14 IN

Nameplate Specifications

Output HP:	3 Hp	Output KW:	2.2 kW
Frequency:	60 Hz	Voltage:	208-230/460 V
Current:	9.2-8.8/4.4 A	Speed:	1175 rpm
Service Factor:	1.15	Phase:	3
Efficiency:	89.5 %	Power Factor:	71.5
Duty:	Continuous	Insulation Class:	F
Design Code:	B	KVA Code:	K
Frame:	213TCV	Enclosure:	Totally Enclosed Fan Cooled
Thermal Protection:	No Protection	Ambient Temperature:	40 °C
Drive End Bearing Size:	6309	Opp Drive End Bearing Size:	6206
UL:	Recognized	CSA:	Y
CE:	Y	IP Code:	43
Number of Speeds:	1

Technical Specifications

Electrical Type:	Squirrel Cage Induction Run	Starting Method:	Across The Line
Poles:	6	Rotation:	Reversible
Resistance Main:	2.7431 Ohms	Mounting:	Rigid Base
Motor Orientation:	Horizontal Or Up Or Down	Drive End Bearing:	Ball
Opp Drive End Bearing:	Ball	Frame Material:	Rolled Steel
Shaft Type:	T	Overall Length:	19.47 in
Frame Length:	9.65 in	Shaft Diameter:	1.375 in
Shaft Extension:	3.12 in	Assembly/Box Mounting:	F1/F2 CAPABLE

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

C385B New Marathon Electric Motor, Model 184TTFW16006, 5 HP, 3525 RPM, 184TC Frame

By Leave a Comment Jul 21 0

Marathon electric motor catalog C385B

Model 184TTFW16006

5HP, 3525 RPM, 184TC Frame

60 Hertz
HP	5	Voltage	230/460
kW	3.70	FL Amps	12/6
RPM	3600
FL Eff	88.5 %	SF	1.15

50 Hertz
HP	3	Voltage	190/380
kW	2.24	FL Amps	9/4.5
RPM	3000
FL Eff	87.5 %	SF	1.15

Phase	3	Insulation Class	F
Frame	184TC	Duty	CONTINUOUS
Enclosure	TEFC	Ambient	40
Mounting	C-Face – Removable Base	NEMA Design	B
Orientation	HORIZONTAL OR SHAFT DOWN	Starting Type	ACROSS THE LINE
Assembly	F1 (F2 Modification Available)	KVA Code	J
Drive End Bearing	BALL	IP Code	43
Opposite End Bearing	BALL
Drive End Bearing Size	6206
Opposite End Bearing Size	6205
Weight	99 LB lbs
CE	Y	CSA	Y
UL	Recognized Construction

Features:

Ball bearings, mechanically locked on shaft end (excludes 5K models)
1.15 Service Factor (except as noted)
Class F insulation (except as noted)
Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted)
56-145T frame motors accept brake kits, see accessory kits
UL Recognized and CSA Certified
Two-year warranty on EPAct and NEMA Premium efficient motors

Additional features for “Four-In-One” motors only:

CR200 Corona resistant magnet wire
Bolt-on, removable rigid base
Suitable for horizontal and vertical mounting
Will accept drip cover kits

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

C386B New Marathon Electric Motor, Model 184TTFW16027, 5 HP, 1765 RPM, 184TC Frame

By Leave a Comment Jul 21 0

Marathon electric motor catalog C386B

Model 184TTFW16027

5HP, 1765 RPM, 184TC Frame

60 Hertz
HP	5	Voltage	230/460
kW	3.70	FL Amps	12.6/6.3
RPM	1800
FL Eff	89.5 %	SF	1.15

50 Hertz
HP	3	Voltage	190/380
kW	2.24	FL Amps	10/5
RPM	1500
FL Eff	88.5 %	SF	1.15

Phase	3	Insulation Class	F
Frame	184TC	Duty	CONTINUOUS
Enclosure	TEFC	Ambient	40
Mounting	C-Face – Removable Base	NEMA Design	B
Orientation	HORIZONTAL OR SHAFT DOWN	Starting Type	LINE OR INVERTER
Assembly	F1 ONLY	KVA Code	J
Drive End Bearing	BALL	IP Code	43
Opposite End Bearing	BALL
Drive End Bearing Size	6206
Opposite End Bearing Size	6205
Weight	90 LB lbs	Inverter Speed Range	CONSTANT 10:1
CE	Y	CSA	Y
UL	Recognized Construction

Features:

Ball bearings, mechanically locked on shaft end (excludes 5K models)
1.15 Service Factor (except as noted)
Class F insulation (except as noted)
Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted)
56-145T frame motors accept brake kits, see accessory kits
UL Recognized and CSA Certified
Two year warranty on EPAct and NEMA Premium efficient motors

Additional features for “Four-In-One” motors only:

CR200 Corona resistant magnet wire
Bolt-on, removable rigid base
Suitable for horizontal and vertical mounting
Will accept drip cover kits

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

CP-R1365 New Rotom Electric Motor, 1 HP, 1725 RPM, 115/230 VAC, Ball Bearing

By Leave a Comment Jul 16 0

New Rotom electric motor CP-R1365

1-1/2HP, 1725 RPM, 115/230 VAC, Ball bearing

REPLACES:

Armstrong 816678-062
Bell & Gossett 169095

Typical Applications include hot water Boiler & booster pumps.

*CLICK HERE FOR AN IMMEDIATE EMAIL REQUEST OR QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

CPO33 New Century Electric Motor, 5HP, 1750 RPM, 184JP Frame

By Leave a Comment Jul 28 0

Century electric motor CPO33

5HP, 1750 RPM, 184JP Frame

REPLACES: Century motor TCP82030, E283

REPLACED WITH NEW MARATHON ELECTRIC MOTOR GT2413A

Horse Power:	5
Amperes:	14.2-12.8/6.4
Frequency:	60
RPM:	1750
Voltage:	208-230/460
Motor Type:	POLYPHASE
Frame Size:	184JP
Nema Suffix:	JP
Service Factor:	1.15
Phase:	3
Enclosure:	ODP
Bearings:	6307ZZ/6205ZZ
Ambient Temperature:	40
Insulation Class:	F
Rotation:	REVERSIBLE
Protector:	NONE
Agency Approvals:	CE CSA UL
Duty Cycle:	CONT

CLICK HERE TO VIEW THE DIMENSIONS

SRVC Electric Motors can help you find the right motor for your application!

We sell replacements for GOULDS, FRANKLIN, CENTURY, MAGNETEK, BALDOR, MARATHON, LEESON, and GE just to name a few.

SRVC Electric Motors offers a wide variety of new pumps, new pump motors, and parts for most major pump repairs.

We offer new motors from the leading manufacturers in the industry such as Baldor Electric, Siemens, Leeson Electric, Marathon Electric, GE, Teco-Westinghouse, WEG, Century electric, and many more. If you’re looking for new replacement parts, we carry new mechanical-seals, bearings, couplings, bearing assemblies, and much more!

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT? CALL US TODAY! SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

CPO39 New Century Electric Motor, 5HP, 3475 RPM, 182JP Frame

By Leave a Comment Jul 28 0

Century electric motor CPO39

5HP, 3475 RPM, 182JP Frame

REPLACES:

CENTURY E297, TCP82005

REPLACED WITH THE NEW MARATHON ELECTRIC MOTOR GT2412

Horse Power: 5
Amperes: 13.7-12.4/6.2
Frequency: 60
RPM: 3475
Voltage: 208-230/460
Motor Type: POLYPHASE
Frame Size: 182JP
Nema Suffix: JP
Service Factor: 1.15
Phase: 3
Enclosure: ODP
Bearings: 6307ZZ/6205ZZ
Ambient Temperature: 40
Insulation Class: F
Rotation: REV
Protector: NONE
Agency Approvals: CE, CSA, UL
Duty Cycle: CONTINUOUS

Features:

• Types JM & JP

• Horizontal

• Rigid Base

• 2 & 4 Pole

• 1 – 25 HP

• NEMA Premium & EPACT

• Class F Insulation System

• Inverter Duty

• 1.15 Service Factor

• 50/60 Hz

(50 Hz @ next lower HP, 1.15 SF)

• CE

• CSA

• UL Approvals

• 40° C Ambient

• IP22

• Rolled Steel Construction

$ E-Plus energy efficient motor complying with EPact

Rated for operation on 60HZ or 50HZ line frequency, full load amps listed at 60HZ.

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT? CALL US TODAY! SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DC142 New Century Electric DC Motor, 1.5 HP, 1750 RPM, 143TC/145TC Frame, 180 VDC

By Leave a Comment Jul 8 0

Century Electric DC motor DC142

1.5HP 1750 RPM

143TC/145TC frame 180VDC

*Removable rigid base

Horse Power:	1-1/2
RPM:	1750
Voltage:	180
Motor Type:	PM
Frame Size:	145TC
Nema Suffix:	TC
Enclosure:	TE
Ambient Temperature:	40C
Insulation Class:	F
Rotation:	REV
Duty Cycle:	CONT

**REPLACES: D080

Features:

• 40˚C Ambient • UL Class H Insulation File #E46316 • CE Approved

• SCR Rated • UL Recognized Construction File #55476 • CSA Certified File #LR39033

• Continuous Duty • Skewed armature for smooth quiet operation

•DC electric motor controls available! Please call or email us with your motor details, application details, and input voltage specifications for an immediate quote.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DC144 New Century Electric DC Motor, 3 HP, 1750 RPM, 143/145TC Frame, 180 VDC

By Leave a Comment Jul 7 0

DC144 New Century Electric DC Motor, 3 HP, 1750 RPM, 143/145TC Frame, 180 VDC

Horsepower:	3
RPM:	1750
Voltage:	180
Motor Type:	PMDC
Frame Size:	143TC
Nema Suffix:	TC
Enclosure:	TE
Ambient Temperature:	40C
Insulation Class:	F
Rotation:	REV
Duty Cycle:	CONT

Features:

• 40˚C Ambient • UL Class H Insulation File #E46316 • CE Approved

• SCR Rated • UL Recognized Construction File #55476 • CSA Certified File #LR39033

• Continuous Duty • Skewed armature for smooth quiet operation

•DC electric motor controls available! Please call or email us with your motor details, application details, and input voltage specifications for an immediate quote.

OTHER APPLICATIONS MAY INCLUDE:

ATTIC FANS – BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

DC160 New Century Electric DC Motor, 3 HP, 1750 RPM, 184TC Frame, 180 VDC

By Leave a Comment Jul 7 0

Century electric DC motor DC160

3HP 1750 RPM 184TC frame 180VDC

***Replaces: W202

Horse Power: 3
Amperes: 15
RPM: 1750
Voltage: 180
Motor Type: DF
Frame Size: 184TC
Nema Suffix: TC
Service Factor: 1.0
Enclosure: TEFC
Ambient Temperature: 40
Insulation Class: H3
Rotation: RECONN
Agency Approvals: RoHSULCSA
Duty Cycle: CONT.

Features:

• 40˚C Ambient • UL Class H Insulation File #E46316 • CE Approved

• SCR Rated • UL Recognized Construction File #55476 • CSA Certified File #LR39033

• Continuous Duty • Skewed armature for smooth quiet operation

•DC electric motor controls available! Please call or email us with your motor details, application details, and input voltage specifications for an immediate quote.

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

DC163 New Century Electric DC Motor, 1.5 HP, 2500 RPM, 143/145TC Frame, 180 VDC

By Leave a Comment Jul 8 0

Century Electric DC motor DC163

1.5HP 2500 RPM

143TC/145TC frame 180VDC

*Removable rigid base

Horse Power:	1-1/2
RPM:	2500
Voltage:	180
Motor Type:	PMDC
Frame Size:	143TC
Nema Suffix:	TC
Enclosure:	TEFC
Ambient Temperature:	40C
Insulation Class:	F
Rotation:	REV
Duty Cycle:	CONT

**REPLACES: D074

Features:

• 40˚C Ambient • UL Class H Insulation File #E46316 • CE Approved

• SCR Rated • UL Recognized Construction File #55476 • CSA Certified File #LR39033

• Continuous Duty • Skewed armature for smooth quiet operation

•DC electric motor controls available! Please call or email us with your motor details, application details, and input voltage specifications for an immediate quote.

APPLICATIONS MAY INCLUDE:

ATTIC FANS – BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DC166 New Century Electric DC Motor, 2 HP, 1750 RPM, 143/145TC, Frame, 180 VDC

By Leave a Comment Jul 7 0

DC166 New Century Electric DC Motor, 2 HP, 1750 RPM, 143/145TC, Frame, 180 VDC

Century electric DC motor D081

Updated to new number DC166

2HP 1750 RPM

143TC/145TC frame

180VDC

*Removable rigid base

Horsepower: 2
Amperes: 9.5
RPM: 1750
Voltage: 180
Motor Type: DF
Frame Size: 145TC
Nema Suffix: TC
Enclosure: TEFC
Ambient Temperature: 40
Insulation Class: H3
Rotation: RECONN
Agency Approvals: RoHSULCSA
Duty Cycle: CONTFeatures:

• 40˚C Ambient • UL Class H Insulation File #E46316 • CE Approved

• SCR Rated • UL Recognized Construction File #55476 • CSA Certified File #LR39033

• Continuous Duty • Skewed armature for smooth quiet operation

OTHER APPLICATIONS MAY INCLUDE:

ATTIC FANS – BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC – GENERAL ELECTRIC – AO SMITH ELECTRIC – RELIANCE ELECTRIC – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS.

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT? CALL US TODAY! SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DHP0054 New Teco Westinghouse Electric Motor, 5 HP, 1800 RPM, 184T Frame

By Leave a Comment Jul 17 0

Teco Westinghouse electric motor DHP0054

5HP 1800 RPM 184T frame

Catalog Number:

DHP0054

Motor Type:

NEMA Premium Efficiency ODP

Frame:

184T

HP:

RPM:

1800

Voltage:

230/460

Enclosure:

ODP

REPLACEMENT BRANDS INCLUDE:

Baldor Electric – Century Electric – Marathon Electric – Leeson Electric – Lincoln Electric – GE AO Smith Electric – Reliance Electric – Franklin Electric – Brook Crompton – Hemco

Ohio PM – Fasco Electric – Allen Bradley – ABB – Demag – Elektra

REPLACEMENTS AVAILABLE FOR:

Delco Electric – WER – Electrim – Magnetek Electric – Doerr – Red Band – Universal Electric – Electrical Apparatus – Gould – ASEA

*CLICK HERE FOR AN IMMEDIATE QUOTE

*Please include your daytime contact information, and any details such as motor nameplate information, and a brief description of the application of the motor.

SRVC Electric Motors will provide you the best customer service, deepest discounts, and over 19 years’ worth of electrical-apparatus know-how.

Need Parts? Let SRVC help you find replacement parts for your AC motor, or DC motor!

We’re here to help you locate the correct replacement, or options for your application!

*Most orders ship same day from stocking locations throughout the USA.

DJ10P1DM New US Electric Motor, 10 HP, 3500 RPM, 213JM Frame, Model CS23

By Leave a Comment Jul 16 0

DJ10P1DM New US Electric Motor, 10 HP, 3500 RPM,

213JM Frame, Model CS23

Special Application Close Coupled Pump

Three Phase

Open Dripproof (ODP)

Premium Efficient

JM Shaft – Footed

HORSEPOWER: 10
KILOWATTS: 7.5
POLES: 2
NUMBER SPEEDS: 1
RPM: 3500
RPM 2: 3500
RPM 3: 3470
RPM 4: 2860
RPM 5: 2860
HERTZ: 60
HERTZ 2: 50
VOLTS PRIMARY: 208-230/460
VOLTS : 460
VOLTS 2: 230
VOLTS 3: 208
VOLTS 4: 380
VOLTS 5: 190
FRME : 213
SHAFT CODE: JM
MOUNTING: HORZ-FOOTED
ASSEMBLY POSITION: F1
MOTOR TYPE: DE4
OPPOSITE END BEARING: 6205-2Z-J/C3
SHAFT END BEARING: 6309-2Z-J/C3
AMBIENT: 40
SERVICE FACTOR: 1.15
STARTCAPMFD: N\A
SHIPPING WEIGHT: 90
BREAKDOWN TORQUE: 265
BREAKDOWN TORQUE UOM: PERCENT OF FLT
LOCKED ROTOR TORQUE: 164
LOCKED ROTOR TORQUE UOM: PERCENT OF FLT
INSULATION CLASS: F
KVA CODE LETTER: F
LOCKED ROTOR AMPS: 72.1
NEMA NOMINAL EFFICIENCY: 90.2
FULL LOAD AMPS PRIMARY: 27.1-24.3/12.2
SERVICE FACTOR AMPS PRIMARY: 32-28.1/14.1

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DJ10P1DM New US Electric Motor, Model CS23 10 HP, 3500 RPM, 213JM Frame

By Leave a Comment Jul 19 0

US Electric motor Catalog DJ10P1DM Model CS23

10HP, 3500 RPM, 213JM Frame

Model_Number: CS23
PRODUCT NAME: 10 HP – DP – 3500
PHASETYPE: 3_PHASE
MOTOR ENCLOSURE: DP
HORSEPOWER: 10
KILOWATTS: 7.5
POLES: 2
NUMBER SPEEDS: 1
RPM: 3500
RPM 2: 3500
RPM 3: 3470
RPM 4: 2860
RPM 5: 2860
HERTZ: 60
HERTZ 2: 50
VOLTS PRIMARY: 208-230/460
VOLTS : 460
VOLTS 2: 230
VOLTS 3: 208
VOLTS 4: 380
VOLTS 5: 190
FRAME : 213
SHAFT CODE: JM
MOUNTING: HORZ-FOOTED
ASSEMBLY POSITION: F1
MOTOR TYPE: DE4
OPPOSITE END BEARING: 6205-2Z-J/C3
SHAFT END BEARING: 6309-2Z-J/C3
AMBIENT: 40
SERVICE FACTOR: 1.15
STARTCAPMFD: N\A
SHIPPING WEIGHT: 90
BREAKDOWN TORQUE: 265
BREAKDOWN TORQUE UOM: PERCENT OF FLT
LOCKED ROTOR TORQUE: 164
LOCKED ROTOR TORQUE UOM: PERCENT OF FLT
INSULATION CLASS: F
KVA CODE LETTER: F
LOCKED ROTOR AMPS: 72.1
NEMA NOMINAL EFFICIENCY: 90.2
FULL LOAD AMPS PRIMARY: 27.1-24.3/12.2
SERVICE FACTOR AMPS PRIMARY: 32-28.1/14.1
* Extruded Aluminum Frame

CLICK HERE TO VIEW THE DIMENSIONS

FEATURES:

* Oversized Ball Bearings w/Locked Shaft-End Construction

* Reversible Rotation

* F1 Assembly Position

* Aluminum End Shields with Steel Bearing Inserts

* Shaft Slinger on drive-end For IP54 Protection

* Removable Base

* Lifting Provisions

* ‘JM’ Shaft indicates Mechanical Seal, ‘JP’ Shaft indicates Packing Seal

APPLICATIONS:

Meeting the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft in damp, dusty, or dirty environments.

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DJ15P1DM New US Electric Motor 15 HP, ODP, 3490 RPM, 215JM Frame, 208-230/460VAC 3PH

By Leave a Comment Sep 7 0

DJ15P1DM New US Electric Motor 15 HP, ODP, 3490 RPM,

215JM Frame, 208-230/460VAC 3PH, Model FL78

Special Application Close Coupled Pump
Three Phase
Open Dripproof (ODP)
Premium Efficient
JM Shaft – Footed

PHASE TYPE:3_PHASE

MOTOR ENCLOSURE:ODP

HORSEPOWER:15 KILOWATTS:11.2

POLES:2

NUMBER SPEEDS:1 RPM:3490 RPM 2: 3490 RPM 3: 3455 RPM 4 :2830 RPM 5: 2830

60 / 50 HERTZ

VOLTS PRIMARY:208-230/460

VOLTS :460

VOLTS 2:230

VOLTS 3:208

VOLTS 4:380

VOLTS 5:190

FRAME :215

SHAFT CODE:JM

MOUNTING: HORZ-FOOTED

ASSEMBLY POSITION: F1

MOTOR TYPE:DE4

OPPOSITE END BEARING:6205-2Z-J/C3

SHAFT END BEARING:6309-2Z-J/C3

AMBIENT:40

SERVICE FACTOR:1.15

INSULATION CLASS: F

KVA CODE LETTER: F

LOCKED ROTOR AMPS:108.2

NEMA NOMINAL EFFICIENCY:90.2

FULL LOAD AMPS PRIMARY:40-36/18

SERVICE FACTOR AMPS PRIMARY:0-42/20.8

CLICK BELOW FOR DATAPACK

DJ15P1DM

DJ3C1P18M New US Electric Motor Model BB15, 3 HP, 3500 RPM, 182JM Frame

By Leave a Comment Jul 19 0

US Electric motor Catalog DJ3C1P18M Model BB15

Model_Number: BB15
PRODUCT NAME: 3 HP – DP – 3500
PHASE TYPE: 1_PHASE
MOTOR ENCLOSURE: DP
HORSEPOWER: 3
KILOWATTS: 2.2
POLES: 2
NUMBER SPEEDS: 1
RPM: 3500
RPM 2: 3500
HERTZ: 60
VOLTS PRIMARY: 115/230
VOLTS : 230
VOLTS 2: 115
FRAME : 182
SHAFT CODE: JM
ASSEMBLY POSITION: F1
MOTOR TYPE: DM4
OPPOSITE END BEARING: 6204-2Z-J/C3
SHAFT END BEARING: 6307-2Z-J/C3
AMBIENT: 40
SERVICE FACTOR: 1.15
STARTCAPMFD: N\A
SHIPPING WEIGHT: 81
INSULATION CLASS: F
KVA CODE LETTER: H
FULL LOAD AMPS PRIMARY: 16.0/32.0
SERVICE FACTOR AMPS PRIMARY: 0.0/36.8

CLICK HERE TO VIEW WIRING DIAGRAM

FEATURES:

• Class F Insulation • Rolled Steel Frame • Oversized Ball Bearings w/Locked Shaft End Construction • Reversible • F1 Assembly Position • Shaft Slinger on drive-end

• Lifting Provisions 180 Frame & Up • ‘JM’ Shaft For Mechanical Seal, ‘JP’ Shaft for Packing Seal

Used where dirt and moisture are minimal.

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

DJ5P2DM New US Electric Motor, Model CS13, 5 HP, 1760 RPM, 184JM Frame

By Leave a Comment Jul 19 0

US Electric Motor Catalog DJ5P2DM Model CS13

Model_Number: FN40
PRODUCT NAME: 5 HP – ODP – 1755
PHASE TYPE: 3_PHASE
MOTOR ENCLOSURE: ODP
HORSEPOWER: 5
KILOWATTS: 3.7
POLES: 4
NUMBER SPEEDS: 1
RPM: 1755
RPM 2: 1755
RPM 3: 1745
RPM 4: 1440
RPM 5: 1440
HERTZ: 60
HERTZ 2: 50
VOLTS PRIMARY: 208-230/460
VOLTS : 460
VOLTS 2: 230
VOLTS 3: 208
VOLTS 4: 380
VOLTS 5: 190
FRAME : 184
SHAFT CODE: JM
MOUNTING: HORZ-FOOTED
ASSEMBLY POSITION: F1
MOTOR TYPE: DE4
OPPOSITE END BEARING: 6206-2Z-J/C3
SHAFT END BEARING: 6207-2Z-J/C3
AMBIENT: 40
SERVICE FACTOR: 1.15
STARTCAPMFD: N\A
SHIPPING WEIGHT: 60
BREAKDOWN TORQUE: 305
BREAKDOWN TORQUE UOM: PERCENT OF FLT
LOCKED ROTOR TORQUE: 198
LOCKED ROTOR TORQUE UOM: PERCENT OF FLT
INSULATION CLASS: F
KVA CODE LETTER: H
LOCKED ROTOR AMPS: 41
NEMA NOMINAL EFFICIENCY: 89.5
FULL LOAD AMPS PRIMARY: 13.7-12.4/6.2
SERVICE FACTOR AMPS PRIMARY: 15.9-14.1/7.1

FEATURES:

* Extruded Aluminum Frame

* Oversized Ball Bearings w/Locked Shaft-End Construction

* Reversible Rotation

* F1 Assembly Position

* Aluminum End Shields with Steel Bearing Inserts

* Shaft Slinger on drive-end For IP54 Protection

* Removable Base

* Lifting Provisions

* ‘JM’ Shaft indicates Mechanical Seal, ‘JP’ Shaft indicates Packing Seal

APPLICATIONS:

Meeting the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft in damp, dusty, or dirty environments.

*CLICK HERE FOR AN IMMEDIATE QUOTE!

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!