00518OT3E184T-S New WEG Electric Motor, 5HP, 1755 RPM, 184T Frame

Description

WEG electric motor 00518OT3E184T

5HP 1755 RPM 184T frame 

• Output: 5 HP
• Poles: 4
• Frequency: 60 Hz
• Torque: 14.8 lb.ft
• Voltage: 208-230/460 V
• Frame: 184T
• RPM: 1755
• Full Load Amps: 14.2-12.8/6.41 A
• Efficiency (100%): 89.5
• Power factor (100%): 0.81
• Insulation: F
• Noise: —
• No load current: 6.00/3.00 A
• Locked rotor current (II/In): 7.3

WEG Premium Efficiency motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal. Design ‘B’ torque and high efficiency design from E143/5T through 444/5T frames (design ‘A’ for frames 447/9T and 5010/11T). These motors are specifically designed to provide maximum ventilation and heat dissipation. ‘C’ and ‘D’ flange available.

Standard Features Three-phase, II, VI and VI pole, 60Hz Voltage: 208-230/460V, 200V, 460V or 575V Open drip proof (ODP) NEMA dimensions NEMA Design ‘B’ (NEMA Design ‘A’ for frames 447/9T and 5010/11T) Service factor: 1.15 Class ‘F’ insulation for all frames Continuous Duty (S1), 104°F ambient (40ºC) AISI 1040/5 heat treated and stress relieved carbon steel shaft for frames E143/5T to 364/5T and 444/5T and 5010/11 in two poles. AISI 4140 heat treated and stress relieved carbon steel shaft for frames 404/5T to 5010/11T in 4 and 6 poles and 477/9T in two poles F1 mount (also available flanged motors) Paint: Synthetic enamel alkyd resin base Color: RAL 5009 – Blue NPT threaded terminal box Stainless steel nameplate – laser etched (except roller steel frame – sticker)

Frame – Specific Features

FOR FRAME E143/5T up to 215T only

• Welded steel plate frames (welded feet)
• Aluminum endshields and terminal box
• ‘ZZ’ bearings (double shielded)
• Degree of protection: IP21 FOR FRAME 254T UP TO 444/5T
• Cast iron frames
• Cast iron endshields and terminal box
• All 3600RPM and 1800RPM motors are supplied with ball bearings as standard. Roller bearings are supplied as standard on frames 404T up to 445T, 1200RPM
• Regreasable bearings positive pressure lubrication system (frame 254T and up)
• Degree of protection: IP23

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!