Sale!
Original price was: $7,297.00.$4,500.00Current price is: $4,500.00.
Description
Marathon electric motor Catalog U516
Model 326TSTDP4024
60HP, 3565 RPM, 326TS Frame
Nameplate Specifications
| Output HP | 60 Hp |
| Output KW | 45 kW |
| Frequency | 60 Hz |
| Voltage | 230/460 V |
| Current | 135/67.5 A |
| Speed | 3555 rpm |
| Service Factor | 1.15 |
| Phases | 3 |
| Efficiency | 93 % |
| Duty | CONTINUOUS |
| Insulation Class | B |
| Design Code | B |
| KVA Code | G |
| Frame | 326TS |
| Enclosure | DP |
| Overload Protector | NOT |
| Ambient Temperature | 50 °C |
| Drive End Bearing Size | 6312 |
| Opp Drive End Bearing Size | 6311 |
| UL | No |
| CSA | Y |
| CE | Y |
| IP Code | 22 |
Technical Specifications
| Electrical Type | SQ CAGE IND RUN |
| Starting Method | WYE START DELTA RUN |
| Poles | 2 |
| Rotation | REV |
| Mounting | RIGID |
| Motor Orientation | HORIZONTAL |
| Drive End Bearing | BALL |
| Opp Drive End Bearing | BALL |
| Frame Material | CAST IRON |
| Shaft Type | TS |
| Overall Length | 26 in |
| Frame Length | 15.12 in |
| Shaft Diameter | 1.88 in |
| Shaft Extension | 4.02 in |
| Assembly/Box Mounting | F1/F2 CAPABLE |
- Red paint on 25 HP through 200 HP
- NEMA Design B, Code G or less
- Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
- Will accept C-Face kits (except as noted), see Accessories section for kits
- 230/460 and 460 Volt models rated for 50 HZ at next lower HP, 1.15 SF as noted
SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.
LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!
*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!
Additional information
| Weight | 611.00 lbs |
|---|




Leave a Reply
You must be logged in to post a comment.