SRVC Electric Motors

(810)820-2940 Email: Roy@srvcelectricmotors.com NEW Electric Motors, Gear Reducers, Pumps, and Parts!

GT0075 New Marathon 40 HP, General Purpose Motor, 3 Phase, 1200 RPM, 230/460 VAC, 364T Frame, ODP

By Leave a Comment 0

GT0075 New Marathon 40 HP, General Purpose Motor

3 Phase, 1200 RPM, 230/460 VAC, 364T Frame, ODP

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • 182T-365T models steel frame, 404T-449T models cast iron frame
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • 12 Leads for WYE-DELTA, part winding on low voltage, or across-the-line starting

Nameplate Specifications

Output HP: 40 Hp Output KW: 30.0 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 97.0/48.5 A Speed: 1188 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 94.1 % Power Factor: 82
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 364T Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6314 Opp Drive End Bearing Size: 6313
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Part Wdg Start & Wye Start Delta Run Or Inverter
Poles: 6 Rotation: Reversible
Resistance Main: .204 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 31.69 in
Shaft Diameter: 2.375 in Shaft Extension: 5.88 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0076 New Marathon 50 HP, General Purpose Motor, 3 Phase, 3565 RPM, 230/460 VAC, 324TS Frame, ODP

By Leave a Comment 0

GT0076 New Marathon 50 HP, General Purpose Motor, 3 Phase, 3565 RPM, 230/460 VAC, 324TS Frame, ODP

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • 182T-365T models steel frame, 404T-449T models cast iron frame
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • 12 Leads for WYE-DELTA, part winding on low voltage, or across-the-line starting

 

Nameplate Specifications

Output HP: 50 Hp Output KW: 37.0 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 115.0/57.5 A Speed: 3565 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93 % Power Factor: 87.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: F
Frame: 324TS Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6212 Opp Drive End Bearing Size: 6212
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Part Wdg Start & Wye Start Delta Run Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .1708 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: TS Overall Length: 27.05 in
Shaft Diameter: 1.875 in Shaft Extension: 3.75 in
Assembly/Box Mounting: F1/F2 CAPABLE

*Most orders ship same day from stocking locations throughout the USA.

GT0081 New Marathon 60 HP, General Purpose Motor, 3 Phase, 1785 RPM, 230/460 VAC, 364T Frame, ODP

By Leave a Comment 0

GT0081 New Marathon 60 HP, General Purpose Motor, 3 Phase, 1785 RPM, 230/460 VAC, 364T Frame, ODP

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • 182T-365T models steel frame, 404T-449T models cast iron frame
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • 12 Leads for WYE-DELTA, part winding on low voltage, or across-the-line starting

Nameplate Specifications

Output HP: 60 Hp Output KW: 45.0 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 140.0/70.0 A Speed: 1782 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 95 % Power Factor: 84
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 364T Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6314 Opp Drive End Bearing Size: 6313
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Part Wdg Start & Wye Start Delta Run Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .115 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 31.69 in
Shaft Diameter: 2.375 in Shaft Extension: 5.88 in
Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0084 New Marathon 75 HP, General Purpose Motor, 3 Phase, 1780 RPM, 230/460 VAC, 365T Frame, ODP

By Leave a Comment 0

GT0084 New Marathon 75 HP, General Purpose Motor, 3 Phase, 1780 RPM, 230/460 VAC, 365T Frame, ODP,

MODEL 365TTDBD6060

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • 182T-365T models steel frame, 404T-449T models cast iron frame
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • 12 Leads for WYE-DELTA, part winding on low voltage, or across-the-line starting

Nameplate Specifications

Output HP: 75 Hp Output KW: 56.0 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 172.0/86.0 A Speed: 1782 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 95 % Power Factor: 86
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 365T Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6314 Opp Drive End Bearing Size: 6313
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

 

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Wye Start Delta Run Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .0848 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 33.27 in
Shaft Diameter: 2.375 in Shaft Extension: 5.88 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0086 New Marathon 100 HP, General Purpose Motor, 3 Phase, 3568 RPM, 230/460 VAC, 365TS Frame, ODP

By Leave a Comment 0

GT0086 New Marathon 100 HP, General Purpose Motor, 3 Phase, 3568 RPM, 230/460 VAC, 365TS Frame, ODP

MODEL 365TSTDBD6001

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • 182T-365T models steel frame, 404T-449T models cast iron frame
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • 12 Leads for WYE-DELTA, part winding on low voltage, or across-the-line starting

Nameplate Specifications

Output HP: 100 Hp Output KW: 75.0 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 227.0/114.0 A Speed: 3568 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93.6 % Power Factor: 88
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 365TS Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6312 Opp Drive End Bearing Size: 6312
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Wye Start Delta Run Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .0742 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: TS Overall Length: 31.14 in
Shaft Diameter: 1.875 in Shaft Extension: 3.75 in
Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0419A New Marathon 10 HP, Close Coupled Pump Motor 3 Phase, 1768 RPM, 230/460 VAC, 215JM Frame, ODP

By Leave a Comment 0

GT0419A New Marathon 10 HP, Close Coupled Pump Motor

3 Phase, 1768 RPM, 230/460 VAC, 215JM Frame, ODP

Catalog GT0419 Part 215TTDBD6032

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Nameplated 60/50 hertz, 190/380 volts at next lower HP
  • Steel frame with Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 25.4/12.7 A Speed: 1768 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91.7 % Power Factor: 80.1
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 215JM Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6307 Opp Drive End Bearing Size: 6202
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: 1.217 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Or Shaft Down Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: JM Overall Length: 19.22 in
Frame Length: 11.15 in Shaft Diameter: 0.876 in
Shaft Extension: 4.53 in Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0421A New Marathon 15 HP, Close Coupled Pump Motor, 3 Phase, 3515 RPM, 230/460 VAC, 215JM Frame, ODP

By Leave a Comment 0

GT0421A New Marathon 15 HP, Close Coupled Pump Motor

3 Phase, 3515 RPM, 230/460 VAC, 215JM Frame, ODP

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Nameplated 60/50 hertz, 190/380 volts at next lower HP
  • Steel frame with Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

 

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 36.0/18.0 A Speed: 3515 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 90.9 % Power Factor: 85.8
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 215JM Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6307 Opp Drive End Bearing Size: 6202
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .97 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Or Shaft Down Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 19.22 in
Frame Length: 11.15 in Shaft Diameter: 0.874 in
Shaft Extension: 4.53 in Assembly/Box Mounting: F1/F2 CAPABLE

GT0424 New Marathon Electric Pump Motor, Model 254TTDCA6007 20 HP, 3545 RPM, 254JM Frame

By Leave a Comment 0

Marathon electric Pump motor

Catalog GT0424 Model 254TTDCA6007

20HP, 3600 RPM, 254JM Frame

**REPLACES: Catalog E191 Model 254TTDX4006

Nameplate Specifications

Output HP 20 HpOutput KW 14.9 kW

Frequency 60 Hz

Voltage 230/460 V Current 46.5/23.3 A

Speed 3545 rpm

Service Factor 1.15 Phases 3

Efficiency 91 %

Duty CONTINUOUS

Insulation Class F

Design Code B KVA Code G

Frame 254JM

Enclosure DP

Overload Protector NOT

Ambient Temperature 40 °C

Drive End Bearing Size 6209 Opp Drive End Bearing Size 6208

UL Recognized CSA Y CE Y

IP Code 22

Technical Specifications

Electrical Type SQ CAGE INV RATED

Starting Method LINE OR INVERTER

Poles 2

Rotation REV

Mounting RIGID

Motor Orientation HORIZONTAL

Drive End Bearing BALL Opp Drive End Bearing BALL

Frame Material CAST IRON

Shaft Type JM

Overall Length 24.41 in

Shaft Diameter 1.25 in

Shaft Extension 5.25 in

Assembly/Box Mounting F1/F2 CAPABLE

CLICK HERE FOR COMPLETE DATA PACK

Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
Nameplated 60/50 hertz, 190/380 volts at next lower HP
Class F Insulation
Standard assembly F1, reversible to F2 assembly

*CLICK HERE FOR AN IMMEDIATE QUOTE!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0459 New Marathon 15 HP, Close Coupled Pump Motor, 3 Phase, 1774 RPM, 230/460 VAC, 254JM Frame, ODP

By Leave a Comment 0

GT0459 New Marathon 15 HP, Close Coupled Pump Motor,

3 Phase, 1774 RPM, 230/460 VAC, 254JM Frame, ODP

 

 

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
Nameplated 60/50 hertz, 190/380 volts at next lower HP
Steel frame with Class F Insulation
Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 37.5/18.8 A Speed: 1774 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93 % Power Factor: 81
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 254JM Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6208
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

 

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Selective Clockwise
Resistance Main: .6729 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: JM Overall Length: 24.41 in
Frame Length: 10.62 in Shaft Diameter: 1.249 in
Shaft Extension: 5.5 in Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT0464 New Marathon 25 HP, Close Coupled Pump Motor, 3 Phase, 3556 RPM, 230/460 VAC, 256JM Frame, ODP

By Leave a Comment 0

GT0464 New Marathon 25 HP, Close Coupled Pump Motor,

3 Phase, 3556 RPM, 230/460 VAC, 256JM Frame, ODP

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
  • Nameplated 60/50 hertz, 190/380 volts at next lower HP
  • Steel frame with Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

 

Nameplate Specifications

Output HP: 25 Hp Output KW: 18.7 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 59.5/29.7 A Speed: 3556 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91.7 % Power Factor: 86
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 256JM Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6208
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .4758 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: JM Overall Length: 25.99 in
Frame Length: 12.20 in Shaft Diameter: 1.249 in
Shaft Extension: 5.5 in Assembly/Box Mounting: F1/F2 CAPABLE
Inverter Load: CONSTANT 2:1/VARIABLE 10:1

GT1014A New Marathon 5 HP, General Purpose Motor, 3 Phase 1180 RPM, 230/460 VAC, 215T Frame, TEFC

By Leave a Comment 0

GT1014A New Marathon 5 HP, General Purpose Motor, 3 Phase 1180 RPM, 230/460 VAC, 215T Frame, TEFC

MODEL 215TTFCD6076

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2009
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 5 Hp Output KW: 3.7 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 13.6/6.8 A Speed: 1180 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 89.5 % Power Factor: 77.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: J
Frame: 215T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6308 Opp Drive End Bearing Size: 6208
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 6 Rotation: Reversible
Resistance Main: 2.656 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 20.03 in
Shaft Diameter: 1.375 in Shaft Extension: 3.38 in
Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1015A New Marathon 7.5 HP, General Purpose Motor, 3 Phase, 3520 RPM, 230/460 VAC, 213T Frame, TEFC

By Leave a Comment 0

GT1015A New Marathon 7.5 HP, General Purpose Motor, 3 Phase, 3520 RPM, 230/460 VAC, 213T Frame, TEFC

MODEL 213TTFCD6001

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section
  • NEMA design A

Nameplate Specifications

Output HP: 7.50 Hp Output KW: 5.6 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 18.4/9.2 A Speed: 3520 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 90.3 % Power Factor: 84.6
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: H
Frame: 213T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6308 Opp Drive End Bearing Size: 6208
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: 1.635 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 18.53 in
Frame Length: 7.95 in Shaft Diameter: 1.375 in
Shaft Extension: 3.38 in Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1016A New Marathon 7.5 HP, General Purpose Motor, 3 Phase, 1768 RPM, 230/460 VAC, 213T Frame, TEFC

By Leave a Comment 0

GT1016A New Marathon 7.5 HP, General Purpose Motor, 3 Phase, 1768 RPM, 230/460 VAC, 213T Frame, TEFC

MODEL 213TTFCD6026

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2010
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 7.50 Hp Output KW: 5.6 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 19.0/9.5 A Speed: 1768 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93.3 % Power Factor: 79.3
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: H
Frame: 213T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6308 Opp Drive End Bearing Size: 6208
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: 1.473 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 18.53 in
Shaft Diameter: 1.375 in Shaft Extension: 3.38 in
Assembly/Box Mounting: F1/F2 CAPABLE

GT1017A New Marathon 7.5 HP General Purpose Motor, 3 Phase, 1182 RPM, 230/460 VAC, 254T Frame, TEFC

By Leave a Comment 0

GT1017A New Marathon 7.5 HP General Purpose Motor, 3 Phase, 1182 RPM, 230/460 VAC, 254T Frame, TEFC

MODEL 254TTFCD6076

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 7.50 Hp Output KW: 5.6 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 19.8/9.9 A Speed: 1182 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 78.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: H
Frame: 254T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55
Hazardous Location: DIVISION 2 T2B

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1018A New Marathon 10 HP, General Purpose Motor 3 Phase, 3518 RPM, 230/460 VAC, 215T Frame, TEFC

By Leave a Comment 0

GT1018A New Marathon 10 HP, General Purpose Motor 3 Phase, 3518 RPM, 230/460 VAC, 215T Frame, TEFC

MODEL 215TTFCD6001

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2011
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 23.6/11.8 A Speed: 3518 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 90.2 % Power Factor: 88
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 215T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6308 Opp Drive End Bearing Size: 6208
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: 1.218 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 20.03 in
Shaft Diameter: 1.375 in Shaft Extension: 3.38 in
Assembly/Box Mounting: F1/F2 CAPABLE

GT1019A New Marathon 10 HP, General Purpose Motor 3 Phase 1762 RPM, 230/460 VAC, 215T Frame, TEFC

By Leave a Comment 0

GT1019A New Marathon 10 HP, General Purpose Motor 3 Phase 1762 RPM, 230/460 VAC, 215T Frame, TEFC

MODEL 215TTFCD6026

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2012
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 25.0/12.5 A Speed: 1762 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 92.1 % Power Factor: 81.3
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: H
Frame: 215T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6308 Opp Drive End Bearing Size: 6208
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: 1.155 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 20.30 in
Shaft Diameter: 1.375 in Shaft Extension: 3.38 in
Assembly/Box Mounting: F1/F2 CAPABLE

GT1020A New Marathon 10 HP, General Purpose Motor 3 Phase, 1180 RPM, 230/460 VAC, 256T Frame, TEFC

By Leave a Comment 0

GT1020A New Marathon 10 HP, General Purpose Motor 3 Phase, 1180 RPM, 230/460 VAC, 256T Frame, TEFC

MODEL 256TTFCD6076

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

 

 

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 25.8/12.9 A Speed: 1180 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 80.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 256T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 6 Rotation: Reversible
Resistance Main: 1.216 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 25.89 in
Frame Length: 11.73 in Shaft Diameter: 1.626 in
Shaft Extension: 4 in Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1021A Marathon 15 HP, General Purpose Motor, 3 Phase, 3545 RPM, 230/460 VAC, 254T Frame, TEFC

By Leave a Comment 0

GT1021A Marathon 15 HP, General Purpose Motor, 3 Phase,

3545 RPM, 230/460 VAC, 254T Frame, TEFC

MODEL 254TTFCD6001

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2013
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

 

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 35.5/17.8 A Speed: 3545 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 87
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 254T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55

 

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .691 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 24.15 in
Shaft Diameter: 1.625 in Shaft Extension: 4 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1021A New Marathon Electric Motor, 15 HP, 3545 RPM, 254T Frame

By Leave a Comment 0

GT1021A New Marathon Electric Motor, 15 HP, 3545 RPM,

254T Frame

MODEL 254TTFCD6001

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2013
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 35.5/17.8 A Speed: 3545 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 87
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 254T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55
Hazardous Location: DIVISION 2 T2B

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Selective Clockwise
Resistance Main: .691 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 24.15 in
Shaft Diameter: 1.625 in Shaft Extension: 4 in
Assembly/Box Mounting: F1/F2 CAPABLE

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

Electrical apparatus experts since 1994!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1022 New Marathon Electric Motor, Model 254TTFCA6026, 15 HP, 1800 RPM, 254T Frame

By Leave a Comment 0

Marathon electric motor Catalog GT1022

Model 254TTFCA6026

15HP 1800 RPM 254T Frame

60 Hertz
HP 15 Voltage 230/460
kW 11.2 FL Amps 37/18.5
RPM 1800
FL Eff 92.4 % SF 1.15
50 Hertz
HP 10 Voltage 190/380
kW 7.5 FL Amps 31/15.5
RPM 1500
FL Eff 93 % SF 1.15

 

Phase 3 Insulation Class F
Frame 254T Duty CONTINUOUS
Enclosure TEFC Ambient 40
Mounting Rigid NEMA Design B
Orientation HORIZONTAL Starting Type ACROSS THE LINE
Assembly F1 (F2 Modification Available) KVA Code G
Drive End Bearing BALL IP Code 43
Opposite End Bearing BALL
Drive End Bearing Size 6309
Opposite End Bearing Size 6209
Weight 375 LB lbs
CE Y CSA Y
UL Recognized Construction

 

Features:

*MARATHON XRI – Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run-time applications.

*Meets or exceeds NEMA Premium® efficiencies

*NEMA Premium® models are in compliance with EISA2007

*Inverter Duty – Rated 10:1 Variable Torque & 10:1 Constant Torque, 1.0 SF

*1.15 Service Factor  *Class F Insulation

*Standard assembly F1, reversible to F2 assembly  *Nameplated 60/50 hertz

*UL Recognized, CSA Certified and CE Marked

*Two year warranty

OTHER APPLICATIONS MAY INCLUDE:

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – MILLS  – ROCK CRUSHERS – FANS – BLOWERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION 
FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

Electrical apparatus experts since 1994! 

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1022A New Marathon 15 HP, General Purpose Motor 3 Phase 1772 RPM, 230/460 VAC, 254T Frame, TEFC

By Leave a Comment 0

GT1022A New Marathon 15 HP, General Purpose Motor 3 Phase 1772 RPM, 230/460 VAC, 254T Frame, TEFC

MODEL 254TTFCD6026

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2014
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.
  • C-face addition may result in non-NEMA “BA” dim. For new “BA” dim consult chart found in modification section

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 37.5/18.8 A Speed: 1772 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 92.4 % Power Factor: 82
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 254T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .6738 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 24.15 in
Shaft Diameter: 1.625 in Shaft Extension: 4 in
Assembly/Box Mounting: F1/F2 CAPABLE

NEARLY 30 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1023 New Marathon Electric Motor, Model 284TTFCA6076, 15HP, 1185 RPM, 284T Frame

By Leave a Comment 0

Marathon electric motor Catalog GT1023

Model 284TTFCA6076
15HP 1185 RPM 284T Frame

60 Hertz
HP 15 Voltage 208-230/460
kW 11.2 FL Amps 44-41/20.5
RPM 1200
FL Eff 91.7 % SF 1.15
50 Hertz
HP 10 Voltage 190/380
kW 7.5 FL Amps 33.5/16.8
RPM 1000
FL Eff 90.2 % SF 1.15

 

Phase 3 Insulation Class F
Frame 284T Duty CONTINUOUS
Enclosure TEFC Ambient 40
Mounting Rigid NEMA Design B
Orientation HORIZONTAL Starting Type Y START D RUN OR INV
Assembly F1 (F2 Modification Available) KVA Code F
Drive End Bearing BALL IP Code 43
Opposite End Bearing BALL
Drive End Bearing Size 6311
Opposite End Bearing Size 6210
Weight 388 LB lbs Inverter Speed Range VARIABLE 10:1
CE Y CSA Y
UL Recognized Construction

 

Features:

*MARATHON XRI – Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run-time applications.

*Meets or exceeds NEMA Premium® efficiencies

*NEMA Premium® models are in compliance with EISA2007

*Inverter Duty – Rated 10:1 Variable Torque & 10:1 Constant Torque, 1.0 SF

*1.15 Service Factor  *Class F Insulation

*Standard assembly F1, reversible to F2 assembly  *Nameplated 60/50 hertz

*UL Recognized, CSA Certified and CE Marked

*Two year warranty

OTHER APPLICATIONS MAY INCLUDE:

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – MILLS  – ROCK CRUSHERS – FANS – BLOWERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION 
FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

Electrical apparatus experts since 1994!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1023A New Marathon 15 HP, General Purpose Motor, 3 Phase, 1182 RPM, 230/460 VAC, 284T Frame, TEFC

By Leave a Comment 0

GT1023A New Marathon 15 HP, General Purpose Motor

3 Phase, 1182 RPM, 230/460 VAC, 284T Frame, TEFC

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

 

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 40.0/20.0 A Speed: 1182 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91.7 % Power Factor: 77.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 284T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6311 Opp Drive End Bearing Size: 6211
UL: Listed CSA: Y
CE: Y IP Code: 55

 

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Wye Start Delta Run Or Inverter
Poles: 6 Rotation: Reversible
Resistance Main: .7445 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 26.65 in
Frame Length: 11.41 in Shaft Diameter: 1.875 in
Shaft Extension: 4.62 in Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1024A New Marathon 20 HP, General Purpose Motor, 3 Phase, 3540 RPM, 230/460 VAC, 256T Frame, TEFC

By Leave a Comment 0

GT1024A New Marathon 20 HP, General Purpose Motor, 3 Phase, 3540 RPM, 230/460 VAC, 256T Frame, TEFC

MODEL 256TTFCD6001

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2015
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

Output HP: 20 Hp Output KW: 14.9 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 47.5/23.7 A Speed: 3540 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 87.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 256T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 2 Rotation: Reversible
Resistance Main: .546 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 25.89 in
Shaft Diameter: 1.625 in Shaft Extension: 4 in
Assembly/Box Mounting: F1/F2 CAPABLE

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1025A New Marathon 20 HP, General Purpose Motor, 3 Phase, 1768 RPM, 208-230/460 VAC, 256T Frame, TEFC

By Leave a Comment 0

GT1025A New Marathon 20 HP, General Purpose Motor, 3 Phase, 1768 RPM, 208-230/460 VAC, 256T Frame, TEFC

MODEL 256TTFCD6026

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2016
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

Output HP: 20 Hp Output KW: 14.9 kW
Frequency: 60 Hz Voltage: 208-230/460 V
Current: 53.0-48.5/24.2 A Speed: 1768 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93 % Power Factor: 83.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 256T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6309 Opp Drive End Bearing Size: 6209
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .513 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 25.89 in
Shaft Diameter: 1.625 in Shaft Extension: 4 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1028A New Marathon 25 HP, General Purpose Motor, 3 Phase, 1800 RPM, 230/460 VAC, 284T Frame, TEFC

By Leave a Comment 0

GT1028A New Marathon 25 HP, General Purpose Motor

3 Phase, 1800 RPM, 230/460 VAC, 284T Frame, TEFC

REPLACES CENTURY ELECTRIC MOTOR TE164, T46035, T57035

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2019
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

 

Output HP: 25 Hp Output KW: 18.7 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 61.0/30.5 A Speed: 1775 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93.6 % Power Factor: 83
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 284T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6311 Opp Drive End Bearing Size: 6211
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Wye Start Delta Run Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .2988 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 26.65 in
Shaft Diameter: 1.875 in Shaft Extension: 4.62 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

GT1029A New Marathon 25 HP, General Purpose Motor, 3 Phase, 1185 RPM, 230/460 VAC, 324T Frame, TEFC

By Leave a Comment 0

GT1029A New Marathon 25 HP, General Purpose Motor, 3 Phase, 1185 RPM, 230/460 VAC, 324T Frame, TEFC

REPLACES CENTURY ELECTRIC MOTOR TE161, T57060

 

  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2020
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 10:1 Variable Torque and up to 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Nameplate Specifications

Output HP: 25 Hp Output KW: 18.7 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 64.0/32.0 A Speed: 1184 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93 % Power Factor: 78.5
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: G
Frame: 324T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6312 Opp Drive End Bearing Size: 6212
UL: Listed CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Wye Start Delta Run Or Inverter
Poles: 6 Rotation: Reversible
Resistance Main: .327 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 29.69 in
Shaft Diameter: 2.125 in Shaft Extension: 5.25 in
Assembly/Box Mounting: F1/F2 CAPABLE

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!