SRVC Electric Motors

(810)820-2940 Email: Roy@srvcelectricmotors.com NEW Electric Motors, Gear Reducers, Pumps, and Parts!

NP0204 New Teco Westinghouse Electric Motor, 20 HP, 1800 RPM, 256T Frame

By Leave a Comment 0

Teco Westinghouse electric motor catalog NP0204

20HP 1800 RPM 256T Frame

Catalog Number: NP0204
Motor Type: MAX-PE NEMA Prem Eff. TEFC Inverter Duty
Frame: 256T
HP: 20
RPM: 1800
Voltage: 230/460
Enclosure: TEFC

NP0204_complete specifications

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0206 New Teco Westinghouse Electric Motor, 20 HP, 1200 RPM, 286T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0206

20HP 1200 RPM 286T Frame

Catalog Number: NP0206
Motor Type: MAX-PE NEMA Prem Eff. TEFC Inverter Duty
Frame: 286T
HP: 20
RPM: 1200
Voltage: 230/460
Enclosure: TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards. 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0252 New Teco Westinghouse Electric Motor, 25 HP, 3600 RPM, 284TS Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0252

25HP 3600 RPM 284TS Frame

Catalog Number: NP0252
Motor Type: MAX-PE NEMA Prem Eff. TEFC Inverter Duty
Frame: 284TS
HP: 25
RPM: 3600
Voltage: 230/460
Enclosure: TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

 

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0252 New Teco Westinghouse Electric Motor, 25 HP, 3600 RPM, 284TS Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0252

25HP 3600 RPM 284TS Frame

Catalog Number:

NP0252

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

284TS

HP:

25

RPM:

3600

Voltage:

230/460

Enclosure:

TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards. 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0404 New Teco Westinghouse Electric Motor, 40 HP, 1800 RPM, 324T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0404

40HP 1800 RPM 324T Frame

Catalog Number:

NP0404

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

324T

HP:

40

RPM:

1800

Voltage:

230/460

Enclosure:

TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

 

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

 

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

 

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0504 New Teco Westinghouse Electric Motor, 50 HP, 1800 RPM, 326T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0504

50HP 1800 RPM 326T Frame

Catalog Number:

NP0504

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

326T

HP:

50

RPM:

1800

Voltage:

230/460

Enclosure:

TEFC


All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0506 New Teco Westinghouse Electric Motor, 50 HP, 1200 RPM, 365T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0506

50HP 1200 RPM 365T frame

Catalog Number:

NP0506

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

365T

HP:

50

RPM:

1200

Voltage:

230/460

Enclosure:

TEFC


All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0752 New Teco Westinghouse Electric Motor, 75 HP, 3600 RPM, 365TS Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0752

75HP 3600 RPM 365TS Frame

Catalog Number:

NP0752

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

365TS

HP:

75

RPM:

3600

Voltage:

230/460

Enclosure:

TEFC


Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed, 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0754S New Teco Westinghouse Electric Motor, 75 HP, 1800 RPM, 365TS Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0754S

75HP 1800 RPM 365TS Frame

Catalog Number:

NP0754S

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

365TS

HP:

75

RPM:

1800

Voltage:

230/460

Enclosure:

TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

 

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

 

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

 

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)C

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP0756R New Teco Westinghouse Electric Motor, 75 HP, 1200 RPM, 405T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP0756R

75HP 1200 RPM 405T Frame

Catalog Number: NP0756R
Motor Type: MAX-PE NEMA Prem Eff. TEFC Inverter Duty
Frame: 405T
HP: 75
RPM: 1200
Voltage: 230/460
Enclosure: TEFC

*ROLLER BEARING INSTALLED ON DRIVE-END FOR BELT-DRIVE APPLICATIONS

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.

 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

 

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

 

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP1002 New Teco Westinghouse Electric Motor, 100 HP, 3600 RPM, 405TS, Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP1002

100HP 3600 RPM 405TS frame

Catalog Number:

NP1002

Motor Type:

MAX-PE NEMA Prem Eff. TEFC Inverter Duty

Frame:

405TS

HP:

100

RPM:

3600

Voltage:

230/460

Enclosure:

TEFC

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards.
All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION
 FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA! 

NP7/52 New Teco Westinghouse Motor, 7.5 HP, 3600 RPM, 213T Frame

By Leave a Comment 0

Teco Westinghouse motor NP7/52

Motor Type MAX-PE NEMA PREM EFF. TEFC INVERTER DUTY
Frame 213T
HP 7.5
RPM 3600
Voltage 230/460
Enclosure TEFC
Approx. Weight 180.000 LB

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40º C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

NP7/56 New Teco Westinghouse Electric Motor, 7.5 HP, 1200 RPM, 254T Frame

By Leave a Comment 0

Teco Westinghouse electric motor NP7/56

7.5HP 1200 RPM 254T frame

Catalog Number: NP7/56
Motor Type: MAX-PE NEMA Prem Eff. TEFC Inverter Duty
Frame: 254T
HP: 7.5
RPM: 1200
Voltage: 230/460
Enclosure: TEFC

All TECO-Westinghouse Totally Enclosed Fan Cooled, T-Frame squirrel-cage induction motors are designed,

Manufactured, and tested to meet or exceed the latest NEMA, IEEE and CSA standards. 

Motors are dual nameplated for 60 Hz (230/460V) and 50 Hz (190/380V) frequencies; 1.0 S.F. @ 50 Hz.

NEMA Design B

36 month warranty from date of manufacture

UL recognized, Class F non-hygroscopic insulation system with heavy heat resistance enameled copper wire to provide longer winding life and reliability. Inverter rated; see below.

Continuous rating with 1.15 service factor

Design B torques as a minimum

Class B temperature rise @ 40o C ambient

Interchangeable F1 and F2 mounting

Dual drilled feet – longer frame (i.e. 145T drilled also for 143T through 449T frame)

Bi-directional rotation

Dynamically balanced, die-cast aluminum rotor reduces overall system vibrations.

Pressed steel main conduit box is 90 degree rotatable, oversized and fully gasketed.

Neoprene lead and conduit box gaskets prevent the entry of moisture and contaminants.

Grounding terminal inside main box

Rugged cast iron frame and end brackets for rigidity and excellent corrosion resistance

Rolled steel fan cover

External fan is corrosion-resistant and also non-sparking.

Stainless steel nameplate; Zn plated hardware

C-face (143T- 449TZ) and D-flange (254T-449TZ) conversion kits are available.

Oversized, double shielded vacuum degassed ball bearings for frame 140T-280T and open bearings with re-greaseable provisions for frames 280TS, 320T and larger.

Rubber flinger provided on DE for frames 140T to 280T.

Labyrinth type metal flinger on both ends on frames 280TS, 320T and larger.

Suitable for Class I, Division II, Groups B, C, and D; Temperature Code T3C (Self Certified)

Marks are UL recognized, DOE certified, CSA approved, CE Marked, and EISA compliant.

VFD rated per NEMA MG1, part 30.

S. F. will be 1.0 when applied on VFD.

Inverter duty wire capable of withstanding voltage spikes up to 2200V.

Insulated bearings are available as an option. If not purchased, precautions should be taken to eliminate shaft currents that may be imposed on the motor by a VFD.

Speed ranges 20:1 VT, 10:1 CT

**9 leads for 5 HP and below, 12 leads for 7.5 – 12.5 HP, and 6 leads for 150 HP and higher.

*CLICK HERE FOR AN IMMEDIATE QUOTE OR TO LOCATE A LESS EXPENSIVE REPLACEMENT OPTION!   

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

OVER 20 YEARS OF ELECTRICAL APPARATUS KNOW-HOW!  WE KNOW ALL ABOUT MOTORS!

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

P313M2 New Century Electric Motor, 7.5 HP, 1750 RPM, S215TCZ Frame

By Leave a Comment 0

Century 7.5 HP Close-Coupled Pump Motor, 1 phase, 1800 RPM, 230 V, 215TCZ Frame, ODP – P313M2

REPLACES: Century motor P313

  • External slinger
  • Double sealed ball bearings

Nameplate Specifications

Output HP: 7.5 Hp Output KW: 5.6 kW
Frequency: 60 Hz Voltage: 230 V
Current: 34.5 A Speed: 1733 rpm
Service Factor: 1.15 Phase: 1
Duty: Continuous Insulation Class: F
Frame: 215TCZ Enclosure: Open Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
UL: Recognized CSA: Y
CE: Y

Technical Specifications

Electrical Type: Capacitor Start Capacitor Run Starting Method: Across The Line
Poles: 4 Rotation: Counterclockwise
Mounting: Rigid Base Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Keyed Overall Length: 22.98 in
Frame Length: 11.15 in Shaft Diameter: 1.25 in
Shaft Extension: 7.62 in

P313M2 DATA PACK

 

*CLICK HERE FOR AN IMMEDIATE QUOTE!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT?  CALL US TODAY!  SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

P321M2 New Century Electric Motor, 10 HP, 3510 RPM, 215TCZ Frame

By Leave a Comment 0

Century 10 HP Close-Coupled Pump Motor, 1 phase, 3510 RPM, 230 V, 215TCZ Frame, ODP – P321M2

REPLACES: Century motor P321

  • External slinger
  • Double sealed ball bearings

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230 V
Current: 37.5 A Speed: 3510 rpm
Service Factor: 1.15 Phase: 1
Duty: Continuous Insulation Class: F
Frame: 215TCZ Enclosure: Open Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
UL: Recognized CSA: Y
CE: Y

Technical Specifications

Electrical Type: Capacitor Start Capacitor Run Starting Method: Across The Line
Poles: 2 Rotation: Counterclockwise
Mounting: Rigid base Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Keyed Overall Length: 24.83 in
Frame Length: 12.40 in Shaft Diameter: 1.25 in
Shaft Extension: 7.62 in

*CLICK HERE FOR AN IMMEDIATE QUOTE!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT?  CALL US TODAY!  SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

P327M2 -New Century 10 HP, Close Coupled Pump Motor 1 Phase, 3600 RPM, 230VAC, 215JP Frame, ODP

By Leave a Comment 0

Century electric pump motor P327M2

10HP, 3495 RPM, 213JP Frame

REPLACES: Century motor E372, E372ME

  • External slinger
  • Double sealed ball bearings

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60 Hz Voltage: 230 V
Current: 37.5 A Speed: 3510 rpm
Service Factor: 1.15 Phase: 1
Duty: Continuous Insulation Class: F
Frame: 215JP Enclosure: Open Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
UL: Recognized CSA: Y
CE: Y

Technical Specifications

Electrical Type: Capacitor Start Capacitor Run Starting Method: Across The Line
Poles: 2 Rotation: Counterclockwise
Mounting: Rigid base Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Keyed Overall Length: 25.04 in
Frame Length: 12.40 in Shaft Diameter: 1.75 in
Shaft Extension: 8.43 in

*CLICK HERE FOR AN IMMEDIATE QUOTE!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT?  CALL US TODAY!  SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

PFSE3094 New Powerflo Submersible Sewage Pump, 3 HP, 435 GPM, 200-240VAC 3PH

By Leave a Comment 0

Power-Flo sewage pump PFSE3094

3HP 435GPM 200-240VAC 3Phase

Power-Flo submersible sewage pump 435 GPM, 3 HP,

1750 RPM, 200/240 Volts, 21.1/19.2 Amps, 3 PHASE

# PFSE3094

3” NPT flanged discharge

2-1/2″ solid

25 feet 10/4 cord

Dimensions 24′ H X 16.87′ L X 12.87′ W;

Weight. 172 lbs SHIPS VIA TRUCK.

Construction:

Heavy cast iron casing, motor cover and impeller; stainless steel fasteners and rotor shaft.

Oil-filled motor. Permanently lubricated bearings.

Solid handling: 2-1/2′

Impeller: solid handling 2 vane semi-open

Outlet: 3′ FNPT flange

Dimensions: 24′ high, 12.87′ wide 16.87′ long

Level Switch: None

Power-flo Submersible Fountain Pumps Series PFSE
Series HP Total Dynamic Head (TDH) Shut-off (feet)
5′ 10′ 15′ 20′ 25′ 30′ 35′ 40′ 45′ 50′ 55′ 60′
Gallons Per Minute (GPM)
PFSE3094 3 435 410 385 350 320 280 240 200 150 100 50 65′

*CLICK HERE FOR AN IMMEDIATE QUOTE 

*Please include your daytime contact information, and any details such as motor nameplate information, and a brief description of the application of the motor.

Most orders ship same day from stocking locations throughout the USA.

R339M2A New Century Electric Motor, 15 HP, 3525 RPM, 215TDZ Frame

By Leave a Comment 0

Century 15 HP Pool Pump Motor, 3 phase, 3000 RPM, 220/440 V, 215TDZ Frame, ODP – R339M2A

REPLACES: Century motor R339, R339M2

  • 40°C Ambient
  • Reversible
  • External Slinger
  • Purex Hydrotech East Side “L” Series and “C” Series Commercial Pump
  • Sealed Ball Bearings
  • Keyed Shaft
  • Purex Replacement

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 50 Hz Voltage: 220/440 V
Current: 38/19 A Speed: 3525 rpm
Service Factor: 1.15 Phase: 3
Duty: Continuous Insulation Class: F
Frame: 215TDZ Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
UL: Recognized CSA: Y

Technical Specifications

Electrical Type: Polyphase Poles: 2
Rotation: Reversible Mounting: Special/Non-Standard
Motor Orientation: Horizontal Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: Rolled Steel
Shaft Type: Keyed Overall Length: 18.66 in
Frame Length: 11.15 in Shaft Diameter: 1.000 in
Shaft Extension: 3 in

*CLICK HERE FOR AN IMMEDIATE QUOTE!  

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

NEED PARTS FOR AN ELECTRIC MOTOR, PUMP, OR GEAR-PRODUCT?  CALL US TODAY!  SRVC ELECTRIC CAN PROVIDE YOU WITH THE MOST COMPETITIVE PRICING ON REPLACEMENT PARTS

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R422M2 New Century Electric Belt Drive Elevator Motor, 25 HP, 3525 RPM, S254T Frame

By Leave a Comment 0

Century electric motor R422M2

25HP 3525 RPM S254T frame

Horse Power:

25.0

Amperes:

60.0/30.0

Frequency:

60

RPM:

3525

Voltage:

230/460

Motor Type:

MOGB

Frame Size:

S254T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

309SF/207SF

Ambient Temperature:

40

Insulation Class:

F

Rotation:

CCW

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

***REPLACES:  R422

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

Other applications for this motor may include pumps, conveyors, machine-tools, air-handlers, exhaust unit, and fans based on your original motor’s nameplate specifications, and electrical requirements.

Give us a call today for an immediate quote on a new motor, or blower assembly.  Outstanding customer service and our massive cross-reference database will save you a lot of valuable time, trouble, and money.

Send us an email with your motor specifications, application details, or requirements and we’ll help you come up with the most economically feasible replacement.

Most orders ship same day from stocking locations throughout the USA.

R423M2 New Century Electric Belt Drive Elevator Motor, 30 HP, 3520 RPM, S256T Frame

By Leave a Comment 0

Century electric motor R423M2

30HP 3520 RPM S256T frame

Horse Power:

30.0

Amperes:

85.0

Frequency:

60

RPM:

1750

Voltage:

200

Motor Type:

MOGB

Frame Size:

S284T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

311SF/207SF

Insulation Class:

F

Rotation:

RCC

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

***REPLACES:  R423

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized  in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R424M2 New Century Electric Belt Drive Elevator Motor, 40 HP, 3520 RPM, S284T Frame

By Leave a Comment 0

Century electric motor R424M2

40HP 3520 RPM S284T frame

Horsepower:

40.0

Amperes:

94/47

Frequency:

60

RPM:

3520

Voltage:

230/460

Motor Type:

MOGB

Frame Size:

S284T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

311/207

Ambient Temperature:

40

Insulation Class:

F

Rotation:

CCW

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

***REPLACES:  R424

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized  in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

 

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R450M2 New Century Electric Belt Drive Elevator Motor, 20 HP, 1740 RPM, S254T

By Leave a Comment 0

Century electric motor R450M2

20HP 1740RPM S254T

Horse Power:

20.0

Amperes:

61.0

Frequency:

60

RPM:

1740

Voltage:

200

Motor Type:

MOGB

Frame Size:

S254T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

309SF/207SF

Insulation Class:

F

Rotation:

RCC

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

***REPLACES:  R450

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized  in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

SRVC Electric Motors can provide you with the best prices, and deepest discounts, not to mention an invaluable ability to identify the correct replacement.

We’re here to help you locate the right replacement motor, pump, or VFD.

Send us an email with your motor specifications, application details, or requirements and we’ll help you come up with the most economically feasible replacement.

Most orders ship same day from stocking locations throughout the USA.

R451M2 New Century Electric Belt Drive Elevator Motor, 20 HP, 1740 RPM, S254T Frame

By Leave a Comment 0

Century electric motor R451M2

20HP 1740RPM S254T Frame

Horse Power: 20.0
Amperes: 54/27
Frequency: 60
RPM: 1740
Voltage: 230/460
Motor Type: MOGB
Frame Size: S254T
Nema Suffix: T
Service Factor: 1.15
Phase: 3
Enclosure: DP
Bearings: 309/207
Ambient Temperature: *
Insulation Class: F
Rotation: CCW
Agency Approvals: ULCSA
Duty Cycle: 30MIN

***REPLACES:  R451

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized  in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R452M2 New Century Electric Belt Drive Elevator Motor, 25 HP, 1740 RPM, S256T Frame

By Leave a Comment 0

Century electric motor R452M2

25HP 1740RPM S256T frame

Horse Power: 25.0
Amperes: 75.5
Frequency: 60
RPM: 1740
Voltage: 200
Motor Type: MOGB
Frame Size: S256T
Nema Suffix: T
Service Factor: 1.00
Phase: 3
Enclosure: ODP
Bearings: 309SF/207SF
Insulation Class: F
Rotation: RCC
Agency Approvals: ULCSA
Duty Cycle: 30 MIN

***REPLACES:  R452

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized  in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

APPLICATIONS MAY INCLUDE:

ATTIC FANS – BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

 

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R453M2 New Century Electric Belt Drive Elevator Motor, 25 HP, 1740 RPM, S256T Frame

By Leave a Comment 0

Century electric motor R453M2

25HP 1740RPM S256T frame

Horse Power:

25.0

Amperes:

66/33

Frequency:

60

RPM:

1740

Voltage:

230/460

Motor Type:

MOGB

Frame Size:

S256T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

309SF/207SF

Insulation Class:

F

Rotation:

RCC

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

***REPLACES:  R453

CLICK HERE FOR DIMENSIONS

APPLICATIONS MAY INCLUDE:

ATTIC FANS – BLOWERS – EXHAUST UNITS – ROOFTOP VENTS

PUMPS – CONVEYORS – AIR COMPRESSORS -TURNTABLES- TEXTILE MACHINERY

TREADMILLS – AIR HANDLERS – MACHINE TOOLS – MIXERS – SCREEN SHAKERS

REELING EQUIPMENT – SAW MILLS – ROCK CRUSHERS – FANS – SHREDDERS – GEAR REDUCERS

PACKING EQUIPMENT – POWER TRANSMISSIONS – TEST STANDS – PRINTING PRESSES

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

 

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R550M2 New Century Electric Belt Drive Elevator Motor, 30 HP, 1750 RPM, S284T Frame

By Leave a Comment 0

Century electric motor R550M2

30HP 1750 RPM S284T frame

Horsepower:

30.0

Amperes:

85.0

Frequency:

60

RPM:

1750

Voltage:

200

Motor Type:

MOGB

Frame Size:

S284T

Nema Suffix:

T

Service Factor:

1.00

Phase:

3

Enclosure:

ODP

Bearings:

311SF/207SF

Insulation Class:

F

Rotation:

RCC

Agency Approvals:

ULCSA

Duty Cycle:

30 MIN

**REPLACES:  R550

CLICK HERE FOR DIMENSIONS

Built to replace obsolete or OEM belt-drive elevator motors utilized in many elevators such as Otis, Anton Freissler, Fujitec, Haughton Elevator Company, Hitachi, Kone, Marshall Elevator, Montgomery Elevator, Schindler Elevator Corporation, ThyssenKrupp just to name a few.

 

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA!

R551M2 New Century Electric Belt Drive Elevator Motor, 30 HP, 1750 RPM, S284T Frame

By Leave a Comment 0

Century electric motor R551M2

30HP 1750RPM S284T frame

Horse Power: 30.0
Amperes: 74.0/37.0
Frequency: 60
RPM: 1750
Voltage: 230/460
Motor Type: MOGB
Frame Size: S284T
Nema Suffix: T
Service Factor: 1.00
Phase: 3
Enclosure: ODP
Bearings: 311SF/207SF
Insulation Class: F
Rotation: RCC
Agency Approvals: ULCSA
Duty Cycle: 30 MIN


CLICK HERE FOR DIMENSIONS

**REPLACES:  R551

 

REPLACEMENT BRANDS INCLUDE:

BALDOR ELECTRIC  – CENTURY ELECTRIC – MARATHON ELECTRIC – LEESON ELECTRIC

LINCOLN ELECTRIC  – GENERAL ELECTRIC  – AO SMITH ELECTRIC – RELIANCE ELECTRIC  – FRANKLIN ELECTRIC

BROOK CROMPTON ELECTRIC – BROOK HANSEN ELECTRIC –OHIO PM – FASCO ELECTRIC – ALLEN BRADLEY –ABB

DEMAG HOIST & CRANE – GENTEQ

REPLACEMENTS AVAILABLE FOR:

DELCO ELECTRIC – WER DC MOTORS – ELEKTRIM – MAGNETEK ELECTRIC – DOERR ELECTRIC – RED BAND ELECTRIC MOTORS

UNIVERSAL ELECTRIC MOTORS – ELECTRICAL APPARATUS MOTORS – GOULD ELECTRIC MOTORS – ASEA MOTORS – WESTINGHOUSE MOTORS

*CLICK HERE FOR AN IMMEDIATE QUOTE, CROSS-REFERENCES, OR REPLACEMENT OPTIONS. 

*PLEASE INCLUDE YOUR DAYTIME CONTACT DETAILS, AND THE INFORMATION FROM THE NAMEPLATE 
OF YOUR MOTOR, PUMP, OR GEAR-PRODUCT.

SRVC ELECTRIC MOTORS CAN ALSO PROVIDE YOU WITH THE LOWEST PRICES ON DRIVE-BELTS, PULLEYS, SHEAVES, COUPLINGS, AND FASTENERS FOR NEARLY EVERY APPLICATION.

LET THE FRIENDLY STAFF AT SRVC ELECTRIC MOTORS ASSIST YOU IN LOCATING THE CORRECT REPLACEMENT MOTOR, PUMP, GEAR PRODUCT, OR PARTS!

*MOST ORDERS SHIP SAME DAY FROM STOCKING LOCATIONS THROUGHOUT THE USA